Details

The Remote-n-Go mini keychain remote control is the perfect anywhere/anytime remote. It will control most TVs, cable boxes and satellite boxes. You program it yourself by following a few quick and easy steps
(see below).

Please use your Remote-n-Go mini keychain remote control responsibly. Do not use it in any public place without the consent of the owner or operator of the television. This product is intended for private, noncommercial use only.

How to program your Remote-n-Go mini keychain remote control.

Programming IR Codes into the Remote-n-Go

Television

Step 1 Turn on the TV.
Step 2 Press and hold the button labeled TV on the remote for three seconds. The button will light and stay on.
Step 3 Point the remote toward the TV and press CH UP; or CH DOWN; with single button presses. When the TV shuts off, the correct IR code has been selected.
Step 4 Press the TV button again to save the code. The button will blink twice to confirm that the code has been saved.

Cable or Satellite set-top box

Step 1 Turn on the cable or satellite box.
Step 2 Press and hold the button labeled CBL/SAT on the remote for three seconds. The button will light and stay on.
Step 3 Point the remote toward the box and press CH UP; or CH DOWN; with single button presses. When the box shuts off, the correct IR code has been selected.
Step 4 Press the CBL/SAT button again to save the code. The button will blink twice to confirm that the code has been saved.

Changing from TV to Cable/Satellite box channel control

Step 1 Press and hold the CBL/SAT button for three seconds. The button will light and stay on.
Step 2 Press the button labeled VOL UP;.
Step 3 For cable/satellite channel control, press the CBL/SAT button. To be able to control the TV channels, press the TV button. The appropriate button will blink twice to confirm the change.

Click Here For Programming Manual

Specifications

• Size: 2.63" x 1.18" x 0.51" (L x W x H)
  
• Power Supply: Lithium CR2025 battery (included)